5 effective Ways to Make Your Case Less Greasy

Cases and covers are a great way to protect your phone from scratches and drops, but sometimes they become a nuisance. A common frustration with plastic cases is how easily they can become greasy and slippery, making it difficult to hold your phone. But don’t be afraid; There are simple and effective ways to combat this problem and keep your phone case looking clean and new.

Why does my phone case feel greasy?

The problem with greasy cases goes beyond just aesthetics. The oily residue on the surface attracts dirt and dust particles and makes it slippery, increasing the chances of accidental drops. Additionally, oil buildup can create a breeding ground for bacteria, which you want to avoid!

So why does your phone case feel so greasy in the first place? Well, it’s likely a combination of factors. Our hands naturally produce oils throughout the day, especially if we have oily skin or engage in activities that involve touching various surfaces. These oils transfer onto our cases when we handle them regularly.

How to remove grease from your phone case?

There are simple solutions to make your case less oily and shiny again. Nobody wants to hold a greasy phone case, so follow these tips for a sparkling clean result!

Method 1: Cleaning with soap and water

Cleaning with soap and water is one of the simplest yet practical methods to remove grease oil from your case. All you need is a mild liquid soap and some warm water. Start by removing your phone from the case, ensuring it stays safe during cleaning.

Fill a bowl or sink with warm water and add a few drops of liquid soap. Mix it gently until it creates suds. Now, dip a soft cloth or sponge into the soapy water solution. Ensure to wring out any excess moisture before wiping down your case.

Using gentle circular motions, rub the soapy cloth or sponge all over the surface of your greasy phone case. Pay extra attention to any areas that have stubborn stains or dirt buildup. Continue this process until you feel satisfied with how clean your case looks.

Afterward, rinse off any remaining soap residue by running your plastic case under cool tap water. Be careful not to soak it too long, as excessive moisture can damage electronic devices.

Once you’ve rinsed off all the soap, pat dry your case using a clean towel or paper towel. Allow it to air dry completely before putting it back on your phone.

Method 2: Using rubbing alcohol

Rubbing alcohol is a handy tool for cleaning a yellow clear phone case. This method is especially effective for removing stubborn oil stains built up over time.

To start:

  1. Pick a cotton pad and some rubbing alcohol.
  2. Moisten the cloth or pad with the rubbing alcohol, ensuring it does not saturate completely.
  3. Gently rub the oily areas of your clear case in circular motions.

The rubbing alcohol works by breaking down the grease and oil particles on the surface of the case. As you rub, you’ll notice that the oil residue starts to lift off, leaving behind a cleaner and less greasy surface.

Method 3: Baking soda and water solution

A baking soda and water solution can naturally clean your silicone or rubber phone case and remove dirt, grime, and oily residues.


  1. Mix baking soda and water in a small bowl or container.
  2. Dip a soft cloth into the solution and wring out any excess liquid.
  3. Gently wipe down your silicone case with a damp cloth, paying extra attention to areas with stubborn stains or dirt.
  4. Rinse the phone case with clean water and dry it thoroughly with a clean cloth.

Note: This method may not be suitable for leather or fabric material as it can damage the original look of your case.

See also how to clean the Alcantara phone case.

Method 4: Cornstarch or baby powder

If the previous solution doesn’t help to make your cover less greasy, then it’s time to use cornstarch or baby powder. These powders have absorbent properties that can help to soak up excess oil from the plastic case. to use this method:

  1. Sprinkle a generous amount of cornstarch or baby powder onto the oily areas of the phone case.
  2. Gently rub the powder into the plastic with your fingers.
  3. Let it sit for 10 minutes to allow the powder to absorb the oil.
  4. Use a cloth to remove the powder and oil residue.
  5. Repeat the process until all the oil is removed.

Method 5: Vinegar and water mixture

Vinegar, the versatile liquid found in almost every household, is known for its cleaning properties. When combined with water, it becomes a powerful solution to tackle oily residue on your plastic case.

Mix equal water and vinegar in a spray bottle to use this method. Gently dampen a sponge with the mixture and gently wipe down the cover.

Too much vinegar can leave an unpleasant odor, so dilute it properly with water. Additionally, avoid using this method on colored or printed cases, as vinegar may cause some discoloration.

With a few simple ingredients from your kitchen cabinet and a little effort, you can say goodbye to that greasy feeling on your case!


Maintaining a clean and grease-free case for your phone is crucial not only for aesthetic reasons but also for hygiene purposes. The accumulation of oil and dirt on your case can be unappealing and may even lead to the growth of bacteria. Luckily, using these cleaning techniques in your routine maintenance schedule will make you and your device happy – free from unsightly grime!

Leave a Reply

Your email address will not be published. Required fields are marked *